SV-50DT / SV-65DT
SV-50DT / SV-65DT

Drilling & tapping center
The drilling tapping center integrates the features of high speed and maximum stability. The series of machines enhances the structural design to assure the best dynamic and static stability. They are equipped with a 12,000rpm high speed spindle, combined with 48 m/min. rapid traverse rate on three axes making an optimistic integration for high speed, high accuracy and high efficiency.
FEATURES

Perfect Structural Rigidity

  • The stable low gravity machine base offers a solid foundation for the entire machine. The V-shaped inner ribs provide long lasting dynamic and static accuracy.
  • Extra wide span between linear ways exhibits exceptional stability to absorb cutting vibration; free from overhang problems.
  • All structural parts are manufactured from high tensile FC-300 cast iron, stress relieved and deformation free.
  • The box type construction features anti-deformation and anti-bending.
  • The A-shaped machine column firmly supports the ATC unit and head stock. The design is capable of dealing with cutting force from axial and radius directions.
TECHNOLOGY

TECHNOLOGY

12,000rpm Direct-Drive Spindle (Standard)
12,000rpm Direct-Drive Spindle (Standard)
  • BT-30 spindle taper
  • The acceleration / deceleration time for the direct-drive spindle is quickly accomplished in only 1~1.5 seconds. The greatly upgrades machining efficiency.
  • 15,000 / 24,000rpm is optional
16tool Clam Type Atc (Standand)
16tool Clam Type Atc (Standand)
  • The tool magazine can be fitted with BT-30 tool sank.
  • The magazine body is manufactured from aluminum alloy for reducing the inertia load. It also features fast tool change and stable motion.
  • Random, bi-directional tool section.
  • Mechanical tool unclamping mechanism features extremely smooth motion. Accurate cam contour design for simultaneous tool knocking.
Wide Interior Space
Wide Interior Space
  • Wide interior space features good ventilation, efficient chip evacuation. Two coolant flush motors are standard, with the coolant flushing ring inside the chip enclosure that is capable of removing heat source from the machine.
  • Two independent-controlled pumps respectively for spindle cutting and for chip enclosure’s coolant flush.
Anchored Ball Screws
Anchored Ball Screws
  • Both ends of ball screws are anchored on the machine by angular contact ball bearings, that feature higher rigidity and stability than those made by competitors.
  • Pretensioned ball screws remove backlash, and increase positioning accuracy.
Servo Drive
Servo Drive
  • Increases overall performance to achieve outstanding result of high speed high precision cutting.
Concealed Pneumatic Parts
Concealed Pneumatic Parts
  • The pneumatic parts are centralized in a compartment to prevent them from bumping, while helping to keep the machine looking neat.
Optimized Spindle Head H/L Ratio
Optimized Spindle Head H/L Ratio
  • Special cooling device for Z-axis bearing housing. (Opt.)
  • Spared spindle oil cooler. (Opt.)
  • Cooling device for spindle motor flange.
The ratio between the spindle stock's height and width is nearly 1:1, allowing it to present superior capabilities in radial and axial cutting resistance.
  • The ratio between the spindle stock's height and width is nearly 1:1, allowing it to present superior capabilities in radial and axial cutting resistance.
Attentive in-process management, combined with rigorous quality inspection, equates to maximum operational dependability.
Attentive in-process management, combined with rigorous quality inspection, equates to maximum operational dependability.
Attentive in-process management, combined with rigorous quality inspection, equates to maximum operational dependability.
Attentive in-process management, combined with rigorous quality inspection, equates to maximum operational dependability.
Attentive in-process management, combined with rigorous quality inspection, equates to maximum operational dependability.
Attentive in-process management, combined with rigorous quality inspection, equates to maximum operational dependability.
Specifications
ITEM UNIT SV- 50DT SV-65DT
TRAVEL
X axis mm 500 650
Y axis mm 430
Z axis mm 340
Spindle nose to table surface mm 150 ~ 490
WORK TABLE
Table size mm 550 x 400 750 x 400
T- slot (W x No. x P) mm 14 x 3 x 125
Max. loading (average) kg 250
SPINDLE   
Max. spindle speed rpm 10000 (Fanuc), 12000 (Mitsubishi)
Drive type   Direct drive
Motor power output kW 3.7 / 5.5
Spindle taper   BT - 30
FEEDRATE
Rapid traverse speed on X/Y/Z axes M/min 48 / 48 / 48 (Mitsubishi)
36 / 36 / 36 (Fanuc) 
Max. cutting feedrate M/min 12
Servo motor of X/Y/Z  kW 1.5 / 1.5 / 2.0  (Mitsubishi)
1.2  /  1.2  /  1.8 (Fanuc)
AUTOMATIC TOOL CHANGER
Tool capacity pcs 16T (21 T)
ATC type   Clam type
Max. tool diameter (w/ adjacent tool) mm Ø100
Max. tool length mm 200
Max. tool weight kg 3
OTHER
Total require power kva 15
Machine dimension (L x W x H) mm 1650 x 2575 x 2410 1900 x 2575 x 2410
Machine weight kg 2850 3000
Equipment
Standard Equipment
  • Rigid tapping
  • Spindle air blast device
  • Fully enclosed splash guard
  • Heat exchanger for electrical cabinet
  • Automatic lubrication system
  • Cooling system and coolant tank
  • Work lamp
  • Foundation bolts and blocks
  • Tool box with tools
  • Operation and maintenance manual
  • Coolant flushing device
  • Flushing gun
Optional Equipment
  • 15,000 / 24,000rpm direct drive
    spindle Mitsubishi
  • Y axis rear side chip conveyor
  • Y axis rear side screw chip conveyor
  • Spindle cooling system
  • 4th axis rotary table
  • Transformer
  • Coolant through spindle
  • Tool length measurement